The following segment details what is 7000t IFL units. A 7000 IFL supply is consist of Transmitters such as 7000t, 7000R and Receiver (module cards) in following subsequent steps:
- Setting up the supply
- Connecting the fiberoptic cable
- Setting up the receiver four. Powering the IFL
- Connecting the again panel jumpers
- Monitoring the input/output signal
The 7000 IFL transmits a whole L-Band RF-Signal over single-mode fiber by a satellite antenna LNB to regulate and control room and instrumentality setups up to ten kilometers away whereas protecting wonderful signal quality. The 7000 IFL is composed of associate degree optical transmitter (7000T) that receives the L-Band signal from the LNB associate degreed an optical receiver (7000R) that connects to a receiver.
Both 7000T and 7000R components are plugged into a 7000M 3U chassis or power supply that permits the enlargement of the system to assist any half-dozen IFL modules. Accessories embody the Model 7000S Standby Power Supply, the Model 2000 1:1 Redundant Switch, the Model 2100 electronic equipment, and also the Model 7050 Serial Data electronic device, associate degree asynchronous electrical circuit. The 7000 IFL broadcast all satellite modulation schemes – analog or digital. This RF signal is directly modulated and adds nearly no section noise to the original signal. The direct modulation, coupled with the 7000t Link’s RF electronic equipment, guarantees superior signal quality.
Block Diagram
Block Diagram of Foxcom 7000t Transmitter
IFL-Supply flowchart Diagram
Foxcom receiver module card
Foxcom receiver module card
Foxcoms module cards offer high performance, cost-effective alternative to conventional coaxial-cabled systems. The conventional coaxial-cabled systems cover the variety of 950 to 2200MHz systems. The module card receivers are designed for a wide range of satellite UL (Uplinking) facilities whereby excessive input energy degrees are required. Foxcom’s excessive dynamic range DFB laser delivers high-quality signals great for the most worrying applications. This series is like-minded with the first technology Sat-Light 7000 Series platform. The Gold Series guide L-Band, 70/140MHz IF, Wideband (10-2200 MHz), 10MHz Reference, Redundancy, M & C, SNMP, Ethernet, and Serial Data Communication. The link includes an excessive input electricity optical transmitter, which receives the RF signal from an L-band modem, and an optical receiver that connects to the antenna BUC.
All satellite modulation schemes are accommodated – digital or analog. The inherently low phase is achieved through direct modulation of the laser diode. FOXCOM GL7230R4 FEATURES & BENEFITS Optimized for Professional Satellite and Wireless Applications High Input Power (-10 to -30dBm) 10Km Transmission Distance Selectable AGC/MGC Front Panel Test Port Powerful Monitoring Features Compatible with all 1st Generation Sat-Light Products
Automatic Gain Control (AGC) at the transmitter side keeps ultimate operation over a wide range of input signal levels. AGC continues the RF level regardless of optical energy or distance from the transmission website online. Front panel RF checks ports, LEDs, and again panel video display units and alarms allow for complete device repute monitoring and for interfacing with M & C systems. The transmitter unit can provide 15 VDC/350mA for optionally available LNB powering.